1.Summary The device is suitable for underground coal mines, open-pit coal mines, coal preparation plants and other workplaces. It is used to detect the deviation protection signal of the comprehensive protection device of the belt conveyor.
2.Main technical parameters 2.1Contact capacity: 24VDC / 0.5A; (connected to the qualified intrinsically safe circuit) 2.2Contact detection resistance ≤ 0.1 Ω, after vibration and impact ≤ 0.2 Ω; 2.3Action angle: 30 ° ± 3 °; reset angle: 20 ° ± 3 °; 2.4Action performance: when the sensor probe deviates from the normal position to the action angle, the two output terminals shall be connected; when the sensor probe automatically returns to the original position to reach the reset angle, the two output terminals shall be disconnected; 2.5Action force of probe rod: 20N-100N; 2.6Boundary dimension: 361mm × 158mm × 66.5mm; 2.7Weight: 3kg. 2.8The sensor is a simple contact type equipment.
3.Working principle The deviation probe rod of the sensor is located at the limit position of the allowable deviation of the belt. Normally, the belt does not contact the deviation probe rod, and the two terminals of the sensor are not connected; when the belt deviation contacts the deviation probe rod and pushes the probe rod to deviate from the normal position by 30 ± 3 °, the two terminals of the sensor are connected.
4.Structure overview The sensor is composed of shell, deflection probe, travel switch and terminal.
Audited Supplier 
){kind=link}