Mine Use Dust Remover Energy Saving and Environmental Protection

• Customization: Available
• Certification: ISO9001
• Noise: 70-90db
• Model NO.: KJS-YQ
• Control Mode: Remote Control
• Usage: Dust Removal, Smoke Removal
• Transport Package: Wooden Box
• Specification: Wind water linkage
• Trademark: Wantai
• Origin: Huainan, Anhui, China
• Production Capacity: 10000pieces/Year

Product Description

Mine Use Dust Remover

1.Filter
  The filter screen is 400-mesh 304 stainless steel mesh,and  the inner and outer casings are made of 304 stainless steel.
  Used to filter solid particles and pollutants in water to protect the   rotating shaft from wear and ensure that the sprinkler is not  blocked.
  The filter is provided with a sewage valve, and the equipment is operated for 7 to 15 days to manually open the removal of particles and pollutants.

2.Advantages of Mine Hydrodynamic Dust Remover
2.1.It is suitable for dust reduction in fully mechanized mining face, driving face, belt conveyor transfer point and other dust environment.
2.2.The dust-reducing device does not need a power supply, and only the static- pressure water is used for driving the fan to realize the functions of dust- removing and dust-falling; the production is safer and the energy-saving effect is obvious.
2.3.Because the static pressure water in the mine is completely reclaimed water, the alkali and the corrosivity are large, so the device is all corrosion-resistant materials such as stainless steel and the like.
2.4.The Dust Remover is small in volume, light in weight,easy to install and move, save the installation and movement time of the equipment, and greatly improve the working efficiency.
2.5.Dust reducer is divided into spray, vacuum dust two ways, each has diferent use effect.
2.6.The device is designed to withstand 8MPa, 3-4MPa.The fan speed can reach 1500 revolutions per minute, and the recommended operating pressure is 3-4MPa.
2.7.Has wide application range and low water pressure, and can be used for selecting the wind-water linkage dust-falling device.


3.Plant parameter

Equipment size	Dust reduction mode	Airflow	Hydraulic pressure	Wind pressure	Air volume	Fan speed
Φ425	Dust absorption	160-210 m³/min	0.5-6MPa	0.3-0.8MPa	1-2m³/min	1500-2000
Φ550	Dust absorption	230-310 m³/min	0.5-6MPa	0.3-0.8MPa	1-2m³/min	1500-2000
Φ650	Dust absorption	290-360 m³/min	0.5-6MPa	0.3-0.8MPa	1-2m³/min	1500-2000
Φ800	Dust absorption	560-650 m³/min	0.5-6MPa	0.3-0.8MPa	1-3m³/min	1500-2000
Φ1000	Dust absorption	710-830 m³/min	0.5-6MPa	0.3-0.8MPa	1-3m³/min	1500-2000
Φ1200	Dust absorption	870-1000 m³/min	0.5-6MPa	0.3-0.8MPa	1-3m³/min	1500-2000